Dynamode USB2 External 3.5” HDU Enclosures Recalled
May 23, 2016 Leave a comment
A batch of USB-HD3.5S-3.0 and USB-HD3.5SI-BN received into UK with the supplied external power supplies have been manufactured incorrectly.
The AC/DC Adapter was tested by Electrical Safety Assesments and later tested for LVD by an approved testing lab. A risk assesment was done and found the power supply to be of low risk and considered safe to use, however their conclusion was it did not comply with Clauses 5(1) (a) and 5 (1) (b) of the Electrical Equipment (Safety).
Though the actual power supplies present no risk and are safe to use, Dynamode would like to recall the enclosures for changing the power supply and upgrade where necessary.
The following SKUs are AFFECTED by this issue:
029885 – Relating to USB-HD3.5SI-BN
022164 – Relating to USB-HD3.5S-3.0
The following SERIAL NO’s of the above SKUs are UNAFFECTED:
If, as a customer you have identified you do have this specific product, please stop using it at once. There maybe a risk that the external PSU (power supply unit) may produce an ‘electrical short’ causing the PSU to damage the attached HDU (hard disk) and/or a risk of fire on the external PSU.
If you have any queries about this issue and/or wish further information please do not hesitate to contact Dynamode UK.
Dynamode Technical Support: 0845-0758 326 or UK Head Office: 0845-375 2023 or a dedicated recall email: firstname.lastname@example.org